Med-Power
Battery Back-Up System
Specification
Data Sheets
User manual
Precision Reg
Specification
Data Sheets
User manual
Super Flux
Specification
Data Sheets
User manual
Battery Back-Up System - Precision Regulator - Super Flux

Features

Small Footprint Design for Medical Application
 Digital Signal Processing Technology
 Instant Protection against Power Spikes, Swells, Sag
 Superior Sub Cycle Voltage Stabilization of 1%
 Independent Phase Control
 Seamless Redundant Power Paths
 Service without Shutdown
 Advanced Remote Monitor
 *Expandable Battery Back up
 12 pulse Harmonic Reduction
 Intelligent charger with temperature compensation
 Intelligent Safe Battery Test Circuitry
 Intelligent Fan Speed Control
 Low Heat Dissipation
 Front Service Clearance Only
 *Battery Monitoring System
 **Upgradeable to UPS
 Fully Modular for Quick Service
 Light Weight, Easy Installation, Plug & Play
 LCD panel with 24 LED status and alarm indicators
 Support Complex Power Factor Loads
 User Friendly Proven Technology

* Battery Back-Up System only
** Precision Regulator only
*** Super Flux only

Specifications


Input
  Voltage (Nominal) 480 VAC, 3ø, 3W + Gnd
  Voltage Range +20%, -20% (without batteries)
  Frequency 50/60 Hz ±5Hz
  Protection Auto & Maintenance Bypass

Output
  Power Rating 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120, 160, 200 kVA (consult factory for other sizes)
  Power Factor Rating 0.8
  Voltage 480 VAC, 3 Phase, 4 Wires + Gnd
  Crest Fator 3:1
  Voltage Regulation ±1%
  Dynamic Regulation ±2% for Step Load
  Phase Imbalance V thd <2%
  Frequency Stability ±1%
  Overload Rating 150% for 30 Seconds,
125% for 15 minutes
  Neutral Newly derived and bonded to earth

Physical
  Cabinet Dimensions 44"W x 31.5”D x 63”H (w/Batteries)
  Electrical Connection Front Access
  Cable Entry/Exit Bottom
  Service Clearance Modular design for ease of service (Front Only)
  Operating Temperature 32°(0°C) to 10c°F (40°C) (control cabinet),
25˚C (77˚F) (battery cabinet)
  Operating Humidity 10 to 90% non-condensing
  Seismic Anchoring Mounting Brackets (optional)

System
  Configuration Three Phase UPS modular design for easy of service
  Topology Advanced Double Conversion
  Technology   Redundant DSP, microprocessor
  Efficiency 92% typical
  Bypass 1 Static Reverse
  Bypass 2 Internal Maintenance
  Audible Noise <67 dBA at 1 Meter
  Cooling Intelligent speed controlled Forced Air
  Heat Dissipation 6600 BTU Typical

Communication
  Interface RS485, RS232, Relay Contacts
  Display Front Mimic Panel LCD (4 lines X 40 Character backlit LCD)
  Audible Alarm Yes / Programmable
  Emergency Shut Down Local & remote Capability (optional)
  Network Capable Yes (optional)
  Global Monitoring System (Option)
LOCAL: Local PC via RS232 and RS485
REMOTE: Web/SNMP and Dial-up
Due to continuous improvement, specifications are subject to change without prior notification.



       Copyright © 2002 Onlinepower, Inc. All rights reserved.