+ 3 to 20 KVA
+ UL Listed to UL1481
+ Advanced, High Frequency Technology for Non-Linear Loads
+ 92% Efficiency
+ Built-in Load Distribution
+ Pulse Width Modulated (PWM)
+ Double Conversion Technology
+ Generator Compatible with Automatic Governor max. 2Hz per second
+ Castor Based Small Foot Print
+ Built-in Input Power Factor Correction
+ Optional Global Monitoring System
+2 year Factory Warranty
Power Rating | 3, 5, 7.5, 10, 12.5, 15, & 20 KVA |
Input Voltage | 120 (3 & 5 KVA only), 208, 240,or 277 VAC, +15% to -20% |
Output Voltages | 120, 208, 240, 120/240, and 277 VAC (All Standard with output transformer) |
Output Frequency (Inverter Operation) |
60 Hz ±0.5 Hz |
OutputVoltage Regulation |
±3% |
Output Wave Form | Sine-Wave < 5% THD. |
Efficiency | 92 to 93% |
Crest Factor | 3:1 Typical |
Surge Protection | The UPS will protect itself and the load against surges as defined in ANSI/IEEE C62.41 Categories A and B. |
Isolation | Complete from line. Output neu-tral bonded to ground (with otuput transformer only) |
Noise Isolation | -120 dB Common-Mode; -60 dB Transverse-Mode |
Battery | Sealed maintenance-free (AGM) battery |
Battery Voltage | KVA dependent |
Recharge Time | Conforms to UL Standards |
External Battery | Provisions for hardwire connection of optional external battery cabinets or DC source. |
Operating Huminity | 0 - 95% RH w/ no condensation |
Operating Temp. | UPS: 0° to 40°C. (32° - 104°F) Battery: 20° to 30°C. (68° - 86°F) |
Storage Temp. | -20° to 60°C. (-4° - 140°F) |
Altitude | Up to 10,000 ft |
Safety Agencies | UL Listed to UL1481, MEA Approved; State Fire Marshal Approved (CA, NY, IL) |
Cabinet Dimensions | |
3 - 12.5 kVA |
18"W x 35"H x 32"D |
15 - 20 kVA |
29"W x 68"H x 18"D |
Power Supply for Fire Protective Signaling System